Skip to main content

NX CAD Design....

 

HYPERLOOP CONCEPT

 What is Hyperloop:

The rail industry is increasingly embracing technology. Concepts such as automated, maglev and high-speed trains are now becoming a reality. One futuristic concept is the Hyperloop – an ultra-high-speed ground transportation system.which is at very high speed of regular uses train. and from this Hyperloop concept, it may be less consumable time in future.


World's first Hyperloop looks set to open in India




Function of Hyperloop:

 Hyperloop is a sealed tube or system of tubes with low air pressure through which a pod may travel substantially free of air resistance or friction.

The Hyperloop concept operates by sending specially designed "capsules" or "pods" through a steel tube maintained at a partial vacuum. In Musk's original concept, each capsule floats on a 0.02–0.05 in (0.5–1.3 mm) layer of air provided under pressure to air-caster.

The Hyperloop resembles a vactrain system but operates at approximately one millibar (100 Pa) of pressure.

According to calculations, a fully-functioning hyperloop could reach speeds of more than 1,200 km/h (746 mph), which would rival commercial airplanes.

Mumbai-Pune Hyperloop travel in 25 minutes! How the concept of 1,220 kmph  technology came about; top facts - The Financial Express

In the alpha-level concept, passenger-only pods are to be 7 ft 4 inch (2.23 m) in diameter and are projected to reach a top speed of 760 mph (1,220 km/h) to maintain aerodynamic efficiency. The design proposes passengers experience a maximum inertial acceleration of 0.5 g, about 2 or 3 times that of a commercial airliner on takeoff and landing.

 This would drastically reduce travel times versus trains as well as planes over distances of under approximately 1,500 kilometres (930 miles).

Did You Know Two Indian Companies Are Now Working To Bring Elon Musk's  Hyperloop To India?

Prototype hyperloop set-ups have already been built in Nevada and California, and full-scale models are proposed to connect New York City and Washington DC, Dubai and Abu-Dhabi, as well as Paris and Amsterdam, in the coming years.

The government of the Indian state of Maharashtra has approved Virgin Hyperloop one's plans to develop a high-speed line between Mumbai and Pune, which could become the world's first Hyperloop.







The race is on: Plans for Hyperloop technology gather pace in India - The  National








Comments

oshwin said…
I agree with a lot of the points you made in this article. If you are looking for the 316 Stainless Steel Tube, then visit Oshwin Overseas. I appreciate the work you have put into this and hope you continue writing on this subject.

After going through your contents I realize that this is the best of my knowledge as it provides the best information and suggestions. This is very helpful and share worthy. If you are looking for the best pressure vessel steel plate then visit STANCOR ALLOYS INC. Keep sharing more.

Popular posts from this blog

NX CAD Design....

 

WORKSHOP : Precautions || workshop || Safety

  What safety precautions should be observed while working in the workshop ? 1) Keep shop floor clean, free from oil and other slippery materials. 2) Wear proper dress and avoid loose clothing and loose hair. 3) Wear shoes and avoid chapels. 4) Avoid playing, loose talk and funning inside the shop floor. 5) Keep good housekeeping and put all unnecessary items and rejected items in scrap box. 6) Learn everything about the machine before starting and clear all the doubts. 7) Keep a safe distance from rotating and sliding parts. 8) Never store inflammable materials inside or around the shop. 9) Never play with electricity, fire, parts with sharp edge etc. 10) Keep fire buckets and extinguishers ready for use.  

What is the MAGNETO IGNITION SYSTEM? | WORKING | knowledgeaboutautomobile957

MAGNETO IGNITION SYSTEM Magneto is a special type of ignition system with its own electric generator to provide the necessary energy for the system. It is mounted on the engine and replaces all the components of the coil ignition system except the spark plug. A magneto when rotated by the engine is capable of producing a very high voltage and it does not need a battery as a source of external energy. The high tension magneto incorporates the windings to generate the primary voltage as well as to step up the voltage and thus does not require a separate coil to boost up the voltage required to operate the spark plug. Magneto can be either rotating armature type or rotating magnet type. In the first type, the armature consisting of the primary and secondary windings all rotate between the poles of a stationary magnet. whilst, in the second type the magnet revolves and the windings are kept stationary. A third type of magnet to called the polar inductor type is also in use. In the polar in...