Skip to main content

NX CAD Design....

 
Post a Comment

What is Braking System in Automobile? || Classification || Knowledge about automobile957


 What is Braking System?

The brakes cause the vehicle to decelerate or stop and also hold the vehicle in position while stationary. when the brakes are applied to a moving vehicle, the kinetic energy of the vehicle is transformed into heat generated by the friction. The Heat generated is dissipated  to the surrounding air.



Classification of  Braking System:

 1.) According to the Purpose of Brakes.

(a) Service or Foot brake

(b) Hand brake or parking brake

The Service brakes are the main brakes, operated by the foot pedal and are used while the vehicle is moving.

The Parking brake is operated mechanically by parking brake level or pedal, and it is used to hold the vehicle in position while stationary.It is used during parking so that the vehicle may not roll off due to road gradient or fast blowing wind. it is also used in emergency when the service brake fails or proves ineffective. It may be noted that due to its use during emergency, it is also known as emergency brake. 




 2.) According to the construction of Brakes. 

 (a) Drum Brakes

 (b) Disc Brakes

3.) According to the Method of Operation.

(a) Mechanical Brakes

(b)  Hydraulic Brakes

(c) Vacuum Brakes

(d) Air Brakes 

(e) Electric Brakes





Labels:

Comments

Ac Jitu said…
Somebody necessarily lend a hand to make significantly posts I would state. This is the very first time I frequented your website page and to this point? I surprised with the analysis you made to make this particular put up amazing. Excellent activity! Toyota Prius 2016 Car Review
13 April 2021 at 18:59
safeparken said…
Schöne Informationen, wertvolles und exzellentes Design, gute Dinge mit guten Ideen und Konzepten teilen, viele großartige Informationen und Inspirationen, die ich beide brauche, dank der Bereitstellung solch hilfreicher Informationen hier. More Info Automatische Parkscheibe
11 May 2021 at 21:54
Post a Comment

Popular posts from this blog

NX CAD Design....

 
Post a Comment
Read more

WORKSHOP : Precautions || workshop || Safety

  What safety precautions should be observed while working in the workshop ? 1) Keep shop floor clean, free from oil and other slippery materials. 2) Wear proper dress and avoid loose clothing and loose hair. 3) Wear shoes and avoid chapels. 4) Avoid playing, loose talk and funning inside the shop floor. 5) Keep good housekeeping and put all unnecessary items and rejected items in scrap box. 6) Learn everything about the machine before starting and clear all the doubts. 7) Keep a safe distance from rotating and sliding parts. 8) Never store inflammable materials inside or around the shop. 9) Never play with electricity, fire, parts with sharp edge etc. 10) Keep fire buckets and extinguishers ready for use.  
Post a Comment
Read more

Battery: definition, functions, Types, History, components, diagram,

 BATTERY: A battery in automobiles, is an electrochemical device which produce electricity (current) through chemical action inside it. The battery does not store electricity a electrons. The battery stores energy in the chemical form. The electrical energy is produced in the battery by the chemical reaction that occurs between two dissimilar plates that are immersed in a electrolyte solution.  The automotive batteries are rechargeable, therefore, they can also convert a electrical current into chemical energy and stores that energy until it is needed. The amount of electrical energy that a battery can produce depends upon the size, weight,  active area of plates, and the amount of sulphuric acid in the electrolyte. The greatest requirement of electrical energy from the battery occurs when it supplies current for operating the starter in When the engine is started, the vehicle's charging system (generator) supplies current to recharge the battery and to run the electrica...
Post a Comment
Read more